Hi, good morning. Something happened to my screen resolution. In normal mode it looks awful; in recovery mode it looks fine. Results in normal mode.
[xrandr]
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
[xrandr --listmonitors]
xrandr: Failed to get size of gamma for output default
Monitors: 1
0: +*default 1024/271x768/203+0+0 default
I know that my cvt is this one, because in recovery mode I see it.
[cvt 1366 768 60]
# 1368x768 59.53 Hz (CVT) hsync: 47.51 kHz; pclk: 84.75 MHz
Modeline "1368x768_ 60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
I know my monitor is this one, because in recovery mode I see it.
[xrandr --output VGA-1 --mode 1366x768]
xrandr: Failed to get size of gamma for output default
warning: output VGA-1 not found; ignoring
And if I put more commands it keeps giving errors...
So how do I set my monitor to its resolution (1366x768)?
[inxi -CGSxz]
System:
Kernel: 6.9.10-686-pae arch: i686 bits: 32 compiler: gcc v: 13.3.0
Desktop: GNOME v: 46.3.1 Distro: Debian GNU/Linux trixie/sid
CPU:
Info: 2x 1-core model: AMD FX-8350 bits: 64 type: MCP AMP arch: Piledriver
rev: 0 cache: L1: 2x 80 KiB (160 KiB) L2: 2x 2 MiB (4 MiB)
L3: 2x 8 MiB (16 MiB)
Speed (MHz): avg: 1404 high: 1406 min/max: 1400/4000 boost: enabled cores:
1: 1405 2: 1403 3: 1404 4: 1404 5: 1406 6: 1403 7: 1406 8: 1405
bogomips: 64292
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: NVIDIA GK208B [GeForce GT 730] vendor: ZOTAC driver: N/A
arch: Kepler bus-ID: 01:00.0
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 24.1.0 driver: X:
loaded: nouveau,vesa unloaded: fbdev,modesetting dri: swrast gpu: N/A
resolution: 1024x768
API: EGL v: 1.5 drivers: swrast platforms: active: x11,surfaceless,device
inactive: gbm,wayland
API: OpenGL v: 4.5 vendor: mesa v: 24.1.3-2 glx-v: 1.4 direct-render: yes
renderer: llvmpipe (LLVM 17.0.6 256 bits
[xrandr]
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
[xrandr --listmonitors]
xrandr: Failed to get size of gamma for output default
Monitors: 1
0: +*default 1024/271x768/203+0+0 default
I know that my cvt is this one, because in recovery mode I see it.
[cvt 1366 768 60]
# 1368x768 59.53 Hz (CVT) hsync: 47.51 kHz; pclk: 84.75 MHz
Modeline "1368x768_ 60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
I know my monitor is this one, because in recovery mode I see it.
[xrandr --output VGA-1 --mode 1366x768]
xrandr: Failed to get size of gamma for output default
warning: output VGA-1 not found; ignoring
And if I put more commands it keeps giving errors...
So how do I set my monitor to its resolution (1366x768)?
[inxi -CGSxz]
System:
Kernel: 6.9.10-686-pae arch: i686 bits: 32 compiler: gcc v: 13.3.0
Desktop: GNOME v: 46.3.1 Distro: Debian GNU/Linux trixie/sid
CPU:
Info: 2x 1-core model: AMD FX-8350 bits: 64 type: MCP AMP arch: Piledriver
rev: 0 cache: L1: 2x 80 KiB (160 KiB) L2: 2x 2 MiB (4 MiB)
L3: 2x 8 MiB (16 MiB)
Speed (MHz): avg: 1404 high: 1406 min/max: 1400/4000 boost: enabled cores:
1: 1405 2: 1403 3: 1404 4: 1404 5: 1406 6: 1403 7: 1406 8: 1405
bogomips: 64292
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: NVIDIA GK208B [GeForce GT 730] vendor: ZOTAC driver: N/A
arch: Kepler bus-ID: 01:00.0
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 24.1.0 driver: X:
loaded: nouveau,vesa unloaded: fbdev,modesetting dri: swrast gpu: N/A
resolution: 1024x768
API: EGL v: 1.5 drivers: swrast platforms: active: x11,surfaceless,device
inactive: gbm,wayland
API: OpenGL v: 4.5 vendor: mesa v: 24.1.3-2 glx-v: 1.4 direct-render: yes
renderer: llvmpipe (LLVM 17.0.6 256 bits
Statistics: Posted by Debianday — 2024-07-30 21:03